Does anyone know the purpose of this cap ? And, is it critical?
The cap is a .01, connected from pin 8 of the 6SJ7 to ground in the voltage reg circuit.
Note** the cap is NOT shown on the 39B schematic. It is present on the earlier 38 circuit but was apparently omitted from the design in later versions. I had to post the 39B circuit since no 38 presently exists online.
Thanks,
Alan
The cap is a .01, connected from pin 8 of the 6SJ7 to ground in the voltage reg circuit.
Note** the cap is NOT shown on the 39B schematic. It is present on the earlier 38 circuit but was apparently omitted from the design in later versions. I had to post the 39B circuit since no 38 presently exists online.
Thanks,
Alan