Hi Guys,
I have a problem with my Gssl that's working well since two years.
There is an occasional sweep noise on both channel in same time . this noise change in frequencies when i turn the Threshold control and after diseapper.
It seem's coming from the sidechain section.
The noise stop when i unplug the -12v 0v +12v connector of the turbo board or if i remove one of the two LF347 or the LF353
I recorded this noise, you can hear it here:
https://www.yousendit.com/download/WUJhZEUzT2JLVlVkVU1UQw
Anyone have an idea?
Thanks
Marc
I have a problem with my Gssl that's working well since two years.
There is an occasional sweep noise on both channel in same time . this noise change in frequencies when i turn the Threshold control and after diseapper.
It seem's coming from the sidechain section.
The noise stop when i unplug the -12v 0v +12v connector of the turbo board or if i remove one of the two LF347 or the LF353
I recorded this noise, you can hear it here:
https://www.yousendit.com/download/WUJhZEUzT2JLVlVkVU1UQw
Anyone have an idea?
Thanks
Marc