riggler
Well-known member
I gotta get rollin with this M50 mic idea. So I finally made the spheres!
I learned you need to make a good jig, cut slow, and you need to keep it cool.
I am going to make another set since now I know what I am doing.
I am going to fill in that extra gap around the capsule by cutting a ring from a balloon.
(My forstner bit is 1mm oversize!)
CHEERS!!
I learned you need to make a good jig, cut slow, and you need to keep it cool.
I am going to make another set since now I know what I am doing.
I am going to fill in that extra gap around the capsule by cutting a ring from a balloon.
(My forstner bit is 1mm oversize!)
CHEERS!!