rob_gould said:Any reason why this won't fit into 1RU if small meters are used Gustav?
Thanks,
Rob
Gustav said:rob_gould said:Any reason why this won't fit into 1RU if small meters are used Gustav?
Thanks,
Rob
I havent checked it, but no - no reason. The front panel board is not too tall for 1RU, so you should be able to mount it as is.
I was planning on building both a 1 and 2RU this month, when my pots for the kits arrived, but I currently have a suspicion they missed my order, and I will be waiting another 3 months
They have dual gang 4M7 pots at Reichelt, which will work with a little leg bending for the PCB.
Gustav.
G-Sun said:So, I guess drumbus and masterbus is not the typical application for the Symmetrical FET.
I just need to rethink my setup a little.
Gustav said:I feel the addition of a side chain high pass is a symptom of a problem using the gear in 99 out of 100 times
Ok, thanks!Gustav said:I feel the addition of a side chain high pass is a symptom of a problem using the gear in 99 out of 100 times, but opinions will vary on that.
..
I think these kinds of questions would be better suited for "Studio A"!?
Deepdark said:I think you could give it a try
G-Sun said:Is it a problem modding it according to...
Thanks for the tips!Gustav said:You could compare the schematics as a start (at least the part you have to the 1178)
Also, I generally recommend that people build something, make sure they have it working as intended and make observations (with their ears) about the stock circuit before doing modifications.
Enter your email address to join: