Hello!
I`m working on two MK-U47 from Ioaudio! The PSU is set together ond the mic is finished. But before connecting the wire from 105V and audio, I must be 100% shure that I connect them the right way. I will not blow the mic... Ioaudio have this connections on the mic´s xlr:
1: White
2: Blue
3+4+6: Black x 2
5: Red
Its a 6-pin because the polar switch is in the mic.
So my question; who is who here?
Is this right?
1: White - Audio+
2: Blue - Audio -
3+4+6: Black x 2 - Ground / 0V
5: Red - 105V
Regards
Finstad
I`m working on two MK-U47 from Ioaudio! The PSU is set together ond the mic is finished. But before connecting the wire from 105V and audio, I must be 100% shure that I connect them the right way. I will not blow the mic... Ioaudio have this connections on the mic´s xlr:
1: White
2: Blue
3+4+6: Black x 2
5: Red
Its a 6-pin because the polar switch is in the mic.
So my question; who is who here?
Is this right?
1: White - Audio+
2: Blue - Audio -
3+4+6: Black x 2 - Ground / 0V
5: Red - 105V
Regards
Finstad