Pages: 1 [2] 3 4 ... 9

buckethead

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #20 on: May 27, 2017, 06:36:13 AM »
Nice project!!!

Im in for two partial kits :)
Logged

noulou

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #21 on: May 29, 2017, 06:32:07 AM »
This looks great! Well done.
Any chance of getting partial kits without the front panel? I would like to build a +-6db pair.

Nikos
Logged

elskardio

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #22 on: May 29, 2017, 08:53:29 AM »
Quote from: noulou on May 29, 2017, 06:32:07 AM
This looks great! Well done.
Any chance of getting partial kits without the front panel? I would like to build a +-6db pair.

Nikos

No sorry
Logged

living sounds

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #23 on: May 29, 2017, 11:17:57 AM »
Looks great, I'm in for 2-4 kits.

What about the center tapped pots, though? I don't think those can be bought at mouser....
Logged

elskardio

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #24 on: May 29, 2017, 01:35:04 PM »
Logged

Tungstengruvsten

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #25 on: May 30, 2017, 01:39:16 PM »
2 full kits here please!
Logged
Is that a real poncho or a Sears poncho?

elskardio

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #26 on: May 30, 2017, 01:58:08 PM »
Quote from: Tungstengruvsten on May 30, 2017, 01:39:16 PM
2 full kits here please!

Hi Tungstengruvsten,
I will make partial kits only. Are you still interested in 2?
thanks
Logged

AudioHammer

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #27 on: May 30, 2017, 04:10:31 PM »
I will take 2 partial kits.

Looks great !!

AudioHammer
Logged

Tungstengruvsten

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #28 on: May 31, 2017, 02:23:17 PM »
Quote from: elskardio on May 30, 2017, 01:58:08 PM
Hi Tungstengruvsten,
I will make partial kits only. Are you still interested in 2?
thanks
I'm in Canada so i'm fine with partial or full kits -
Logged
Is that a real poncho or a Sears poncho?

mhbunch

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #29 on: May 31, 2017, 03:54:36 PM »
I'll take 2! ;D
Logged

Mulmany

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit Feeler**
« Reply #30 on: June 01, 2017, 12:18:12 AM »
I would be interested in 2 if it's still open.

Logged

elskardio

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit** UPDATE
« Reply #31 on: June 01, 2017, 10:03:22 AM »
First post updated  ;)
Logged

Vac11

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit** UPDATE
« Reply #32 on: June 01, 2017, 11:26:04 AM »
One question: how did you calibrate this EQ?
Logged

elskardio

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit** UPDATE
« Reply #33 on: June 01, 2017, 11:35:11 AM »
Quote from: Vac11 on June 01, 2017, 11:26:04 AM
One question: how did you calibrate this EQ?

By calibration, do you mean the frequency selection?
Logged

Vac11

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit** UPDATE
« Reply #34 on: June 01, 2017, 02:06:01 PM »
There are few trimmer resistors on the PCB... What are they used for?
Logged

elskardio

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit** UPDATE
« Reply #35 on: June 01, 2017, 02:32:36 PM »
Quote from: Vac11 on June 01, 2017, 02:06:01 PM
There are few trimmer resistors on the PCB... What are they used for?

There's a Bias adjustment for the NE5534 on each band. Near the Input/Summing section, there's another trimmer to cancel the noise on the Bypass switch and another one to adjust the output level of the EQ.

The calibration is pretty easy. There's Test points on the pcb. All you need is a Digital Multimeter.
Cheers
Logged

aCr

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit** UPDATE
« Reply #36 on: June 02, 2017, 06:44:12 PM »
I'm in for 2 partial kits
Logged

buckethead

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit** UPDATE
« Reply #37 on: June 08, 2017, 06:06:12 AM »
Payment sent :)
Logged

elskardio

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit** UPDATE
« Reply #38 on: June 08, 2017, 07:47:02 AM »
Quote from: buckethead on June 08, 2017, 06:06:12 AM
Payment sent :)
Payment received
Thanks
Logged

Mulmany

Re: CA-250 EQ // 3 band Sontec in 500 format **Partial Kit** UPDATE
« Reply #39 on: June 09, 2017, 01:24:13 AM »
Payment sent.
Logged
Pages: 1 [2] 3 4 ... 9
 

Related Topics

  Subject / Started by Replies Last post
2 Replies
1778 Views 		Last post October 23, 2011, 02:08:06 AM
by bkbirge
0 Replies
802 Views 		Last post November 02, 2012, 01:53:23 PM
by pucho812
2 Replies
847 Views 		Last post March 10, 2018, 11:13:39 AM
by elskardio
6 Replies
700 Views 		Last post June 16, 2018, 11:52:02 AM
by mysticmerlin