samgraysound
Well-known member
Hey,
I've got a Spirit Powerstation 600 mixer with a low hum that I've isolated to the FX circuit. Comes down when turning down the FX return fader, doesn't when turning down the FX send.
I've got the service manual but for some reason it doesn't include a schematic for the actual effects board, just the "Control Board" with the switches on it.
Is this just some sort of proprietary Lexicon FX board they throw into other manufacturers mixers? It doesn't have a board number like the rest of the PCBs in this mixer. Here's some of the writing on it:
S5102-6821
CPCI-1
1895
94v-0
Lexicon, INC 1995 710-09230
Made in the USA
REV 3
I've got a Spirit Powerstation 600 mixer with a low hum that I've isolated to the FX circuit. Comes down when turning down the FX return fader, doesn't when turning down the FX send.
I've got the service manual but for some reason it doesn't include a schematic for the actual effects board, just the "Control Board" with the switches on it.
Is this just some sort of proprietary Lexicon FX board they throw into other manufacturers mixers? It doesn't have a board number like the rest of the PCBs in this mixer. Here's some of the writing on it:
S5102-6821
CPCI-1
1895
94v-0
Lexicon, INC 1995 710-09230
Made in the USA
REV 3