ruffrecords
Well-known member
In a modular mixer, how much of a gap should you allow between module front panels? For instance a standard Eurorack 7HP module pitch is 1.4 inches or 35.56mm. In front panel designer, when you specify a 7HP wide panel, what you actually get is one that is 35.22mm wide so there is a gap of 0.34mm or about 13 mil between adjacent modules. I guess the gap has to be small enough not to be obviously noticeable but wide enough to handle tolerances but 13 mil seems a bit on the low side to me.
Cheers
Ian
Cheers
Ian