Hello, i have completed my 1176 Mnats Rev J and i am going through the calibration procedures, the Q Bias was easy enough, then I was following the procedure on Video Number 3 and when i got to the part where it says to un-shunt 22 from ground and watch the VU meter drop it never did drop. it just stays at 0. Am i missing something simple? I was searching through the pages here and googling, but havent found what i am looking for. I have found a link to download the original manual, but the link is dead.
Any ideas?
Thanks in advance,
Mike
Any ideas?
Thanks in advance,
Mike