12AT7 Phase splitter

[Mikaeel]

Then I will give it a try. Thanks Merlin for all your suggestions and help!

 

[gorgon53]

The appearend difference in amplitude are mainly do to 2 harmonic distortion

 

[Cqwet Dbdfte]

Seems cathode follower will always make some 2:nd harmonics? So as do the ears.

 

[daschnoz]

Try connecting directly at the cathode. That takes the voltage divider of the 400 ohm / 10k resistor out of the signal path. That voltage divider creates about a 4% drop. It's still not going to be a perfect match between the phases, but it will be closer.

And as mentioned previously, the load resistor (after the decoupling cap) should be at least 10x larger than the load resistor(s) in the DC current path of the tube. 10k at the plate/cathode, 100k after the cap, minimum.