Hi!
I might do a presentation for my project.
8 channels.
Lundahl 1538 for input transformer.
Cinemag CMOQ-2S for output transformers.
Fabio Baumans 2520 DOA
48v
Pad
Phaseswitch
Instrument In on 2 or 4 channels.
All pcb's are 100x60mm.
I got a Shaeffer case. I don't know what the style is called but I call it boardslotcase, the ones you slide the board in just like an api lunchbox.
I got the boardsdesigns done, just need to prototype and test them.
This project is for learning and have fun.
Thats why I don't buy ready made pcb's.
Here are the files:
http://www.rollingthunder.se/saker/api/
Files gets updated with the progress of my project.
First question:
Is my PSU any good.
I've lended bits and pieces from Peter C's greenpre psu and Fabios 312PSU.
Is the capacitance OK on the rails?
Any other designflaws in there?
I know i probably wouldn't do this project because of my none or very little knowledge in electronic design, but that's what this board is for, isn't it?
More to come..
HT
I might do a presentation for my project.
8 channels.
Lundahl 1538 for input transformer.
Cinemag CMOQ-2S for output transformers.
Fabio Baumans 2520 DOA
48v
Pad
Phaseswitch
Instrument In on 2 or 4 channels.
All pcb's are 100x60mm.
I got a Shaeffer case. I don't know what the style is called but I call it boardslotcase, the ones you slide the board in just like an api lunchbox.
I got the boardsdesigns done, just need to prototype and test them.
This project is for learning and have fun.
Thats why I don't buy ready made pcb's.
Here are the files:
http://www.rollingthunder.se/saker/api/
Files gets updated with the progress of my project.
First question:
Is my PSU any good.
I've lended bits and pieces from Peter C's greenpre psu and Fabios 312PSU.
Is the capacitance OK on the rails?
Any other designflaws in there?
I know i probably wouldn't do this project because of my none or very little knowledge in electronic design, but that's what this board is for, isn't it?
More to come..
HT