bobschwenkler
Well-known member
It's pretty much done! I need to figure out why the Hi-Z inputs aren't working quite right, but the rest of it is working perfectly!
I used Fabio's 312 boards and a JLM Powerstation. AP2623s on the first six channels, and Cinemag CMOQ2Ls on the other two. Cinemag 75101APC on the inputs. I have Fabio's 2520s in there, and they'll probably stay there, but also have eight 1730s built which I'll probably compare at some point.
One thing I learned: don't use the screw on terminal blocks. I tried to save a couple bucks by not getting headers that you can just plug and unplug. What a pain... I later bought pluggable terminal blocks and am much happier.
http://www.bicyclerecordings.com/various/312/1.jpg
http://www.bicyclerecordings.com/various/312/2.jpg
http://www.bicyclerecordings.com/various/312/3.jpg
I used Fabio's 312 boards and a JLM Powerstation. AP2623s on the first six channels, and Cinemag CMOQ2Ls on the other two. Cinemag 75101APC on the inputs. I have Fabio's 2520s in there, and they'll probably stay there, but also have eight 1730s built which I'll probably compare at some point.
One thing I learned: don't use the screw on terminal blocks. I tried to save a couple bucks by not getting headers that you can just plug and unplug. What a pain... I later bought pluggable terminal blocks and am much happier.
http://www.bicyclerecordings.com/various/312/1.jpg
http://www.bicyclerecordings.com/various/312/2.jpg
http://www.bicyclerecordings.com/various/312/3.jpg