ADR Audio & Design Recording

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Here are some scans I have which are handwritten by a designer(?)/engineer(?)/tech(?) at ADR about calibrating a 760. His handwriting is quite ornate and tough for me to read, but there is useful info when combined with my post above.

Bri

For some reason the order of the files as I posted pushed page 2 to the end of the sequence.
 

Attachments

  • compexalignment1.pdf
    489.9 KB
  • compexalignment3.pdf
    480.1 KB
  • compexalignment4.pdf
    421.3 KB
  • compexalignment2.pdf
    312.6 KB
I'm working on a badly damaged ADR Transdynamic Processor.
Here are some schematics I dug up (from @synthi) , they're old and quite low-res, so I sharpened them to my best abilities:
 

Attachments

  • IMG_6646-2extra.png
    IMG_6646-2extra.png
    1.3 MB
  • IMG_6649-2extra.png
    IMG_6649-2extra.png
    440.2 KB
  • IMG_6648-2extra.png
    IMG_6648-2extra.png
    511.1 KB
  • IMG_6647-2extra.png
    IMG_6647-2extra.png
    524.5 KB
  • IMG_6652.png
    IMG_6652.png
    224.4 KB
  • IMG_6651.png
    IMG_6651.png
    352.5 KB
  • IMG_6650.png
    IMG_6650.png
    424.5 KB
Back
Top