emtee
Well-known member
I'm in the early stages of building a dual GSSL in a 2u case. It' s my first project in many years, and I'd appreciate any input from other DIYers on my front panel design.
Am I missing anything? Have I made any obvious stupid errors?? What thickness of panel do you guys normally use? Is 3mm overkill???
I picked the meters up on ebay, I'll be adding Steffans's high pass filter mod that Greg's designed the PCBs for. I'm thinking of giving the front panel power switch a miss because I can't see an elegant solution...
FPD file is at www.noize.plus.com/gssl/dualgssl.fpd
A jpeg is at www.noize.plus.com/gssl/dualgssl.jpg
Am I missing anything? Have I made any obvious stupid errors?? What thickness of panel do you guys normally use? Is 3mm overkill???
I picked the meters up on ebay, I'll be adding Steffans's high pass filter mod that Greg's designed the PCBs for. I'm thinking of giving the front panel power switch a miss because I can't see an elegant solution...
FPD file is at www.noize.plus.com/gssl/dualgssl.fpd
A jpeg is at www.noize.plus.com/gssl/dualgssl.jpg