B9A tube right angle mounts

[ruffrecords]

I just bought another 19 KG of filament - PETG and TPU, along with 12KG of ABS. My electronics vendor was closing it out, I could not resist. No... how to pay for it.

I think you will need a hard steel extruder for some of those filaments. The stock stainless steel one would wear out quickly. Fortunately it is a very easy swap on the Bambu printers.

Cheers

Ian

 

[13engrsapper]

I think you will need a hard steel extruder for some of those filaments. The stock stainless steel one would wear out quickly. Fortunately it is a very easy swap on the Bambu printers.

Cheers

Ian

Thanks much Ian,

I have added 0.4 and the 0.6 hardened nozzle and an extruder gear in my cart already - just kinda waiting to see what else I may need before I place that order too. I am planning on buying a filament dryer, probably that side by side one (https://www.amazon.com/gp/product/B0D21N35R2/ref=ox_sc_act_title_1?smid=A3P1JI9UX2MKYC&th=1). I may buy a small 40-50 dollar dehumidifier and make a storage area for the filaments too.

The current printer is busy chugging away on another Gridfinity system pliers holder, I don't think it has had a day of rest since I received it.



Take care,

-Tony