B9A tube right angle mounts

[ruffrecords]

I would think a version with heat-inserted threaded brass inserts would work, certainly not with the structural integrity of all-metal construction.

I agree. The only possibility I can see at the moment are pockets for the nuts. I have seen an example of this somewhere. I need to find it again to see if it could work.

Cheers

Ian

 

[shaggy]

I just realised I have made a serious mistake. As soon as you fit one screw and nut it blocks the way for the other two screws. The cube only works if the holes are threaded! Doh!

Back to the drawing board.

Cheers

Ian

I was wondering when one of you blokes were going to notice that! 8>)