audiomixer
Well-known member
Hi,
I was wondering - according to doug self a simple unbalanced line input is much less noisier then a balanced, at least without quite some effort for the balanced input.
would it be worth trying unbalanced inputs in my 12 + 4 channel mixer project? the outside connections are very controlled, short cable runs from and to audio interface, so the possibility of picking up hum and noise is relatively 'under control'.
adding a balanced output on the other hand might be still a good idea to drive the line input.
any thoughts on this?
cheers,
Michael
I was wondering - according to doug self a simple unbalanced line input is much less noisier then a balanced, at least without quite some effort for the balanced input.
would it be worth trying unbalanced inputs in my 12 + 4 channel mixer project? the outside connections are very controlled, short cable runs from and to audio interface, so the possibility of picking up hum and noise is relatively 'under control'.
adding a balanced output on the other hand might be still a good idea to drive the line input.
any thoughts on this?
cheers,
Michael