lesparapluies
New member
- Joined
- Nov 6, 2018
- Messages
- 1
Hello, my Behringer 1602 just packed in for the 2nd time this year - it is technically still under warranty but it was away for 6 weeks last time and.... life's too short....anyway, I'm pretty sure the transformer is faulty - I'm guessing that the DC rails should be +15v and -15V, can anyone verify that? Secondary of the transformer (two yellow cables and a brown) - I'm assuming should be abut 12-0-12? I'm getting about 13v from one yellow to brown, and abut 0.2v from the other yellow to brown, which suggests a failed winding....can't locate any schematic for the mixer but I think I may take a chance and replace the transformer with a generic 12-0-12 one, or even just bypass the internal PSU altogether and replace it with a -15V - +15V external PSU - any thoughts? Or anyone got a link to a schematic? Many thanks, MD