Hi guys, new to the forum so bare with me
im looking for some help with a behringer ep1500 that I got my hands on. it powers up, fans work etc. The problem is with the gains up full the sound is only just audible from each channel. The problem in my eyes has tp be something before the power amps? something that both channels have in common. my experience with fixing electronics is limited to dry joints and visibly blown parts (swolen caps/ burn marks around resistors etc)
I could really use some help with where to start looking and what to test. I've had a poke around for bad joints etc with a wooden chopstick. checked the ribbon cable but no luck. any help would be much appreciated guys
im looking for some help with a behringer ep1500 that I got my hands on. it powers up, fans work etc. The problem is with the gains up full the sound is only just audible from each channel. The problem in my eyes has tp be something before the power amps? something that both channels have in common. my experience with fixing electronics is limited to dry joints and visibly blown parts (swolen caps/ burn marks around resistors etc)
I could really use some help with where to start looking and what to test. I've had a poke around for bad joints etc with a wooden chopstick. checked the ribbon cable but no luck. any help would be much appreciated guys