BIG SALE: studio gear and parts

[salomonander]

lots of stuff:

- original v-series mini rack for 4x v72 200€
- studer vertical vu meter 60€
- military mic amp (no schematics) with haufe transformers. stuffed pcb no case. 150€
- old tube mini micpre-limiter (no schematics) 150€
- 32ch ntp metering system for vga monitor 250€
- haufe st4294 a 30€
- high quality eo illuminated switched non latching in red a 8€
- itt high quality rotary switches 4x5 - these feel like elmas but are much smaller - solder lugs  a 15€
- sperpent audio sa3a high quality front plate SOLD
- 24v volt power supply by siemens in eurorack 100€
- grayhill 1x8 pcb version adj stops a 8€
- grayhill 1x12 solder lug adj stops (budged version)  a 7€
- bruel&kjaer tube mic stereo set. no power supply - untested 300€
- gefell power supply for mv691 plus cables 80€
- 4x20 lemo patchbay soldered to siemens messerleiste 160€
- audio teknik studio multicore with stagebox. 24ch 150€
- telefunken ef86 NOS a 40€
- telefunken ef804 NOS a 40€
- mwl/wilag original bottle mic no power supply 2000€
- neumann/mwl m7 bajonett prototype 500€
- neumann mv2 mic splitter 150€
- ua audio la2a input transformer 250€
- ilok with cla compressor license 200€
- roland jv2080 including hip hop extension 170€
- emu esi 4000 100€
- telefunken/siemens v97 tape amp 250€
- marconi isolating transformer in sweet bbc boc 120€
- marconi matching transformer in sweet bbc boc 120€
location: munich, germany, will ship off course

 

[API]

Pm´d about B&K mics

 

[mylesgm]

Hi, what's the befell bayonet adaptor?

 

[salomonander]

Hi, what's the befell bayonet adaptor?

it allows you to use an m7 lollipop on a CMV 563 mic. cheers

 

[mylesgm]

but not for mounting bayonet miss on the mv692 body?

 

[Greebok]

Could yo place a photo of bayonet adapter please?  :

 

[zero]

hi,
are these :
itt high quality rotary switches 4x5 - these feel like elmas but are much smaller - solder lugs  a 15€

4pole 5 position?

thank you

 

[salomonander]

hi,
are these :
itt high quality rotary switches 4x5 - these feel like elmas but are much smaller - solder lugs  a 15€

4pole 5 position?

thank you

exactly. 4 poles 5 psotitons. if you want more than 5 i can give you a discount. cheers

 

[salomonander]

but not for mounting bayonet miss on the mv692 body?

im afraid not. but you can get these from mr thiersch for 150€ ....not cheap

 

[salomonander]

its one of these:

 

[salomonander]

im afraid the gefell adapter is sold. cheers

 

[salomonander]

im afraid the gefell adapter is sold. cheers

 

[nashkato]

Are the B&K mics still available ?
Can you send me some pics ?

 

[zero]

hi,
are these :
itt high quality rotary switches 4x5 - these feel like elmas but are much smaller - solder lugs  a 15€

4pole 5 position?

thank you

exactly. 4 poles 5 psotitons. if you want more than 5 i can give you a discount. cheers

Hi,
just two more question, what´s the contact material and plating?
Do the contact make before breaking?

thank you

best regrads,
Pedro

 

[salomonander]

hi,
are these :
itt high quality rotary switches 4x5 - these feel like elmas but are much smaller - solder lugs  a 15€

4pole 5 position?

thank you

exactly. 4 poles 5 psotitons. if you want more than 5 i can give you a discount. cheers

Hi,
just two more question, what´s the contact material and plating?
Do the contact make before breaking?

thank you

best regrads,
Pedro

looks like gold. im not sure if they make before break. how do i find out?

 

[zero]

hi,
if you can see the contacts check if that in between two positions the pole touches both contacts or shorts with a multimeter.

best regards,
Pedro

 

[salomonander]

hi,
if you can see the contacts check if that in between two positions the pole touches both contacts or shorts with a multimeter.

best regards,
Pedro

no beep on my multimeter between the poles. so i assume non-shorting... cheers

 

[salomonander]

 

[zero]

hi,
if you can see the contacts check if that in between two positions the pole touches both contacts or shorts with a multimeter.

best regards,
Pedro

no beep on my multimeter between the poles. so i assume non-shorting... cheers

Hi,
Sorry for the delay and the hassle but i really need shorting type, sorry.
thank you.

best regards,
Pedro

 

[salomonander]

b&k mic