doubleroger
Well-known member
Hello,
My compressor has a problem with its led meter: the two or three first leds of the in/out level stay lit up all the time (on both channels) even with a perfectly quiet output. The audio works flawlessly. As I haven't seen any adjustment inside that could be for some ledmeter aligment, I guess I must have a bad cap somewhere (this dpr402 has seen hell, beaches, sand, mud etc before I bought it) and DC going somewhere it should'nt be.
The guy that does maintenance at the place I got it from (rental company) said it is a very common thing with those machines. Of course he won't help much further...
does someone here have a bss dpr402 service manual or an opinion on the matter at hand?
Thanks,
Arthur.
My compressor has a problem with its led meter: the two or three first leds of the in/out level stay lit up all the time (on both channels) even with a perfectly quiet output. The audio works flawlessly. As I haven't seen any adjustment inside that could be for some ledmeter aligment, I guess I must have a bad cap somewhere (this dpr402 has seen hell, beaches, sand, mud etc before I bought it) and DC going somewhere it should'nt be.
The guy that does maintenance at the place I got it from (rental company) said it is a very common thing with those machines. Of course he won't help much further...
does someone here have a bss dpr402 service manual or an opinion on the matter at hand?
Thanks,
Arthur.