[BUILD] CAPI 553F~500 Series~LC Equalizer~Official Support Thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Jeff, I've been building my second 553F, and I just had a bad thing happen: I was stripping one of the leads on the 1H inductor, and I somehow pulled the wire right out. Is there any way to salvage that part?

Edit: I cut away some tape but I'm not at all confident in my ability to get a lead back on the thing. I bit the bullet and ordered a replacement.
 
Last edited:
Back
Top