Having problems with the LM350T regulators IC's . I have made sure that the fastening screws are centered
and still only getting IC2 21.9 V IN - 0V OUT
IC3 24.8 IN - 2.8V OUT
IC4 21.9 IN - 0V OUT
IC5 24.8 IN - 2.8V OUT
IC1 WORKS AND WAS TRIMMED TO 48.5 (different IC)
DC OUTS - 16 SHOWS -2.8 +16 SHOWS +2.8
V#2'S are identical.
Stumped !
It would appear that all 4 IC;s that are LM350Ts are not functioning.
They are all getting proper voltage. but what is coming out is 14 v low.
Note to self
Maybe you should check the 243 ohm and 2K43 resistors at the voltage regulators
and still only getting IC2 21.9 V IN - 0V OUT
IC3 24.8 IN - 2.8V OUT
IC4 21.9 IN - 0V OUT
IC5 24.8 IN - 2.8V OUT
IC1 WORKS AND WAS TRIMMED TO 48.5 (different IC)
DC OUTS - 16 SHOWS -2.8 +16 SHOWS +2.8
V#2'S are identical.
Stumped !
It would appear that all 4 IC;s that are LM350Ts are not functioning.
They are all getting proper voltage. but what is coming out is 14 v low.
Note to self
Maybe you should check the 243 ohm and 2K43 resistors at the voltage regulators
