Purusha
Well-known member
OK, thanks. Will try like you said.
hitchhiker wrote:
Purusha! I did the same as Keith, and didn't take the ac to the pcb.
For 220v primary I figure the split primary is wired in series. I think the primary hook up would be the orange and yellow wires tied and the white and black to the 220v ac . Hook the transformer up that way and measure the secondary voltage. Mock up a switch affair to confirm the pcb makes the same result . If all checks out you are good to go!
I also think this is the way to go but would be nice to see how the switch works
Enter your email address to join: