CAD GXL 3000

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hi Kingkorg!
Srećna Nova Godina!
Godt nytt år!
✨
You know very well the types and origin of capsules used everywhere. Is it possible that the capsule in the glx3000 is the same capsule found in the t.bone sc1100?
 

Attachments

  • sc-1100_niere_01_afc19926a1_1688042652831_1704098394757.jpg
    sc-1100_niere_01_afc19926a1_1688042652831_1704098394757.jpg
    212.5 KB · Views: 0
  • Screenshot_2024-01-01-11-01-37-773_com.miui.gallery.jpg
    Screenshot_2024-01-01-11-01-37-773_com.miui.gallery.jpg
    743.4 KB · Views: 0
  • Screenshot_2024-01-01-11-04-02-082_com.miui.gallery.jpg
    Screenshot_2024-01-01-11-04-02-082_com.miui.gallery.jpg
    1.1 MB · Views: 0
Hi Kingkorg!
Srećna Nova Godina!
Godt nytt år!
✨
You know very well the types and origin of capsules used everywhere. Is it possible that the capsule in the glx3000 is the same capsule found in the t.bone sc1100?
Srećna Nova og godt nyttår 😁
According to recording hacks, and the images it seems to be the same one.
 
Srećna Nova og godt nyttår 😁
According to recording hacks, and the images it seems to be the same one.
Mulțumesc, Kingkorg!
✨
You confirmed some of my older suspicions.
In addition (except for the capsules) the sc1100 has the same audio circuit as the se3300a (when it was still manufactured by Feilo) and apparently with the AdvancedAudio cm87 old version (the 1G grid resistor seems to be missing in the schematic).
DC/DC in sc1100 and SE3300a follows quite faithfully the Neumann solution with Jfet and bipolar.
 

Attachments

  • Screenshot_2022-08-12-00-47-36-322_com.google.android.apps.docs__1704138872046.jpg
    Screenshot_2022-08-12-00-47-36-322_com.google.android.apps.docs__1704138872046.jpg
    1 MB · Views: 0
As you point out, there should be a bias resistor for the FET gate (to the R10/R11 junction, I'd assume). The T1 transistor will need a base bias resistor as well (traditionally, 180K to ground, although that gives very asymmetrical clipping).
 
Back
Top