Hey guys, I'm building a ton of(about 30) capi 2520s for a bunch of API preamps I'm rebuilding. I've got the opamps built all the way except for the match transistors on the output. I have matched about 300 of the output transistors and organized them into groups of gain and now I just have a few questions.
1. How closely should the pair of transistors be matched?
2. Does the gain of the matched pair affect the output gain of the opamp? Or just the quality of the output signal?
3. If it does affect the overall gain of the opamp, is there a general transistor gain to shoot for?
Thanks, just my first time building a large lot of these at the same time, so I thought I'd ask a few questions to clear some stuff up.
1. How closely should the pair of transistors be matched?
2. Does the gain of the matched pair affect the output gain of the opamp? Or just the quality of the output signal?
3. If it does affect the overall gain of the opamp, is there a general transistor gain to shoot for?
Thanks, just my first time building a large lot of these at the same time, so I thought I'd ask a few questions to clear some stuff up.