Collective Cases - PSU cases, ez1073, CLX cases and PCB's.

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Does anyone know where to find VU-meters that fit the "Stereo FET" and the "PRR-176" front panels in Europe?
Preferably a cheap source.
I've got the MNATS 2-1176LN REV D VERSION 2.2 PCB and the PRR 176 REV 2 PCB.
 
Howdy again!

I have been searching and not finding the following: Latching pushbutton DPDT ON/ON for panel mount about 11,7mm diameter.

All I find is for PCB mount.

It's for a PRR-176 frontpanel from Collective Cases.

Anyone knowing where to look?
 
Has anyone heard from Dan?

I sent him an email a few weeks ago, and haven't heard back. I see he hasn't logged on to this site since October - hope he's OK.
 
Hi Dan, any chance you have an SA-3A Front Panel? I'd even take a B-stock/scratch & dent as a last resort.
Also sent email.
Thanks, Kevin
 
I'll check, But I don't think I so. I'll email ya either way.

Currently in the middle of moving and re organizing the shop so who knows what I will find. haha
 
Dan, I just sent you an e-mail about a case for two Drip Ultra British channels. Also, your P-JO23 transformer, that must be a copy of the venerable Triad JO-23, right? Thanks, Dana Walcott.
 
Hey Dana, I'll email ya. But yes about the transformer and I need some details about the case.

I'll email you now!
 
Hi Dan,

for the Tube Mic PSU (XLR version) do you have any recommendations for:

- indicator lamp
- 3-way (1-pole, 3 position rotary) switch
- power switch
?

Appreciate any direction on those.

Cheers,
-Robert Phillips
 
Back
Top