leanlowkey
Member
im looking to see if anyone knows of or designed a pcb or schematics for a custom channel strip
mic pre to 1176 comp to la comp
im trying to figure best way to make one. have a mic gain knob (doesnt need line input) since it will be just for tracking.
input transformer with DOA and a output transformer.
that runs into a attack and release with ratio knobs. out through another DOA and transformer
then into a LA2a style comp with gain and peak reduction. into a channel fader output doa and transformer.
if that makes any sense.
I currently use a 500 series rack a mic pre, 76 style comp and a la but I really want to have the "channel fader" knob thats on the mic pre to actually be at the end of the chain instead of before the comps.
or is there a pretty easy way to send the signal out the input gain to "bypass" the output trasformer, doa, and gain knob to go through the compressors then back into it.
mic pre to 1176 comp to la comp
im trying to figure best way to make one. have a mic gain knob (doesnt need line input) since it will be just for tracking.
input transformer with DOA and a output transformer.
that runs into a attack and release with ratio knobs. out through another DOA and transformer
then into a LA2a style comp with gain and peak reduction. into a channel fader output doa and transformer.
if that makes any sense.
I currently use a 500 series rack a mic pre, 76 style comp and a la but I really want to have the "channel fader" knob thats on the mic pre to actually be at the end of the chain instead of before the comps.
or is there a pretty easy way to send the signal out the input gain to "bypass" the output trasformer, doa, and gain knob to go through the compressors then back into it.
