G
Guest
Guest
I have a nice drill press and hole cutters which work really nice on alumunium plate up to 3.00mmm thick
I am now drilling holes in 1mm aluminium boxes
These are the sort that have look like this...
http://maplin.co.uk/images/Full/1728i0.jpg
Problem is I can't figure a way of drilling the holes as I can;t lay the box down flat...
I can;t seem to explain this well - but imagine you have got a box and you want to drill holes in the non-removable front and back panel and you can only take the top of...
And the height of the front and back panel isn't long enough to get under the drill press's chuck....
I can't seem to think straight on this...
I am now drilling holes in 1mm aluminium boxes
These are the sort that have look like this...
http://maplin.co.uk/images/Full/1728i0.jpg
Problem is I can't figure a way of drilling the holes as I can;t lay the box down flat...
I can;t seem to explain this well - but imagine you have got a box and you want to drill holes in the non-removable front and back panel and you can only take the top of...
And the height of the front and back panel isn't long enough to get under the drill press's chuck....
I can't seem to think straight on this...