matriachamplification
Wall Thomas
Hello GDIY
my son and I have been looking into a small format router for some time. With no first hand exp. we wanted to ask for thoughts on which is a good starter machine.
To start this would be used for our CTC prototype plates. Mostly etching as we are working to connect with Frank to source panels.
https://www.cancam.ca/product/d-11-minitron-desktop-cnc-router/
Here is what we are considering. Any thoughts, input on other options would be great.
Wall
my son and I have been looking into a small format router for some time. With no first hand exp. we wanted to ask for thoughts on which is a good starter machine.
To start this would be used for our CTC prototype plates. Mostly etching as we are working to connect with Frank to source panels.
https://www.cancam.ca/product/d-11-minitron-desktop-cnc-router/
Here is what we are considering. Any thoughts, input on other options would be great.
Wall