Hi,
Looking into building a plate reverb, wondering if there are purpose-built amps available? If not, looking at DIY options.
Seen an example using this:
BSS TCS-804
What I like is the time delay controls, which seem ideal for reverb.
The transducer under consideration is this:
Vidsonix Ghost
What's needed is a HPF, but very steep. An EQ solution isn't steep enough. I've come across the Butterworth Filter, would this be a suitable design?
Butterworth Filter
3rd order is -60dB/Octave, 4th order is -80dB/Octave.
Cheers
Stephen
Looking into building a plate reverb, wondering if there are purpose-built amps available? If not, looking at DIY options.
Seen an example using this:
BSS TCS-804
What I like is the time delay controls, which seem ideal for reverb.
The transducer under consideration is this:
Vidsonix Ghost
What's needed is a HPF, but very steep. An EQ solution isn't steep enough. I've come across the Butterworth Filter, would this be a suitable design?
Butterworth Filter
3rd order is -60dB/Octave, 4th order is -80dB/Octave.
Cheers
Stephen