One last question.
I simulated the whole circuit and get a good flat response. Gain switch also seems to work.
But what should I specify as load? Lets say, I take an output transformer with 8:1 step down ratio. 600 Ohm load. Would the load on the primary side of the transformer then look like 38400 Ohm (8²x600)?
Sorry, but I'm not allowed to :-\
I had to sign a "contract" not to distribute the schematic...
I can give you the contact of the guy I got it from.
I simulated the whole circuit and get a good flat response. Gain switch also seems to work.
But what should I specify as load? Lets say, I take an output transformer with 8:1 step down ratio. 600 Ohm load. Would the load on the primary side of the transformer then look like 38400 Ohm (8²x600)?
moamps said:Could you please post the whole schematic of the preamp?
Sorry, but I'm not allowed to :-\
I had to sign a "contract" not to distribute the schematic...
I can give you the contact of the guy I got it from.