• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

EZ1290 assembled in case + EZ1290 assembled pcb (update!)

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dirty1_1garry

Well-known member
Joined
Oct 3, 2011
Messages
511
Location
Moscow
Hello!

For sale:

1)EZ1290 Neve classic preamp packed in a nice small and solid case with custom front panel.
That was one of my first project. Done with mojo parts - carbon resistors and Elna/Muse e-lytic capacitors. Mic in tranny - EA, output - Carnhill.
All you need is - add knobs, jlm go-between pcb(holes already designed) I find go-between assembled board!
and psu with +24V and +48V. So now only knobs and external psu are needed!
Can provide all consultations regards it's final assembling!
47634-150116114759.jpeg

47634-150116115230.jpeg

47634-150116115257.jpeg

price - 200$
Worlwide shipping - 30$

2) Assembled EZ1290 preamp pcb. BC184C transistors, Panasonic FC caps, wima/styro film caps, vintage Motorolla 2N3055 with nice heatsink.

47634-150116115632.jpeg

47634-150116115946.jpeg

Price - 50$
Can add gain grayhill rotary switch + 25$
Worlwide shipping - 15$
 
sorry to hijack your thread, but:
Do you still sell your predict pcbs ? Or did you abandon the project ?
I try to reach you since November...
 
kosi said:
sorry to hijack your thread, but:
Do you still sell your predict pcbs ? Or did you abandon the project ?
I try to reach you since November...

Just wrote you a personal message!)
 
Back
Top