leads all coming out the same side, wtf? that is is dangerous way to build a coil, got the line juice next to the HV juice next to the LV juice and the in-between juice,
we are going to split that up and put the mains on one side and the sec winds on the other,
and we ar going to drop the 6L6 B+ volts from 471 which is too high and shortens tube life and sounds harsh and is too loud for a 4-10" speaker amp,
looking to rewind at 400 to 420, this also allows for 500 volt filter caps so you do not have to put two 350 Vs in series, saves space and $$$.
heater VAC was 6.9 volts, so we are going to remove a turn to get us down to 6.3. schematic has 5.52 VAC listed for reasons unknown.
core is laced 1 x 1 and we still only have 1.34 H pri ind which means 26 ma excitation current so we might juice that up a bit,
does have a Faraday shield,