flying faders I optical cable

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
they are hard to get a hold of, real hard.  I am sure digikey sells the cables but I do not know the name of the end connector. It's different the other fiber optic I have seen
 
A lucky search turned up this......
http://www.rapidonline.com/Electronic-Components/Hfbr-4506z-Duplex-Connector-58-0862#techSpecs

It's the off white one 3 down in the picture. I'm not definite on this, but it looks right.

Avago site

http://www.avagotech.com/pages/en/fiber_optics/eval_kits_accessories/fiber_optic_connectors/

gives a PDF of the 4506 range, but I haven't studied it....
 
here is the cable :
https://www.digikey.com/en/products...tGb5XfjXiwxxMrDoqIlps7WzTYBpm9-gaAvWvEALw_wcB

Make sure to get the very dark grey and not the light grey cable. the dark has a much higher bandwidth and lower los. the proper one will have the: HFBR-4516Z – Duplex Latching plug as shown in the post above
cheers.
also I set one trimmer to 30ohms and the other to 65ohms to start to set up current. I cant remember which but I think the card on top of the rack is 30 and the computer card is 65.
 
I might have copied the wrong link, YES FULL Duplex. Digikey was offering the same image for several things...
 
Back
Top