• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

FS: Soft touch mixer knobs (6mm shaft) + Slider/Fader knobs.

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

petermontg

Well-known member
Joined
Dec 29, 2012
Messages
215
Location
Ireland
Mixer Knobs.

279 in total I would like to sell as whole if possible. We pulled these from an old mixer here we are dismantling for parts.
Orange x 64
Grey x 84
white x 64
blue x 35
Yellow x 32

100€ for the lot. buyer pays shipping.

Fader/Slider knobs: 14.75mm x 24mm

Grey x 16
Black x 8
Red x 2

26€ for the lot. buyer pays shipping.

May suit someone building a mixer. Paypal excepted.
DSCN0402_zpsrqdj9v9d.jpg

DSCN0403_zpspiwjrg0c.jpg

DSCN0402_zpsrqdj9v9d.jpg

DSCN0405_zpsgmpa4va9.jpg

DSCN0406_zpsckzfisdr.jpg


Best
Peter
 
ruffrecords said:
Are these the type that fit in splined shafts?

Cheers

Ian

Am not too sure tbh Ian if they will fit a splined shaft but they do have the male part. They were on normal pot shafts when I pulled them off.

Best
Peter
 
petermontg said:
ruffrecords said:
Are these the type that fit in splined shafts?

Cheers

Ian

Am not too sure tbh Ian if they will fit a splined shaft but they do have the male part. They were on normal pot shafts when I pulled them off.

Best
Peter

Sorry just checked for you. Yes all for splined shafted pots.
 

Latest posts

Back
Top