Lerok
Active member
Hello! After a six month break from my tiny side project (switching jobs and houses), I'm back, and I just wanted to run this schematic by the helpful people here before I went and began making a PCB for it.
Anyways, I've combined the 15C1 and 22113 schematics on this website, made a few adjustments (125uf caps are hard to come by around where I live), and cleaned up the wiring mess as best I could.
Warning: It isn't the prettiest schematic you'll ever see (I'm more suited to graph paper and a good old pencil), but it gets the job done.
I'll probably use Cinemag in and out transformers, though I might look into some other ones (maybe a 1:2 10k Jensen for the output?) after the basic build is done.
Anyways, any thoughts/concerns are always welcome! I'm fairly new to electrical work, apart from basic console repair.
Schematics I used:
15C1: https://groupdiy.com/index.php?action=dlattach;topic=58393.0;attach=32789;image
22113: https://imgur.com/lzT8SKf
Anyways, I've combined the 15C1 and 22113 schematics on this website, made a few adjustments (125uf caps are hard to come by around where I live), and cleaned up the wiring mess as best I could.
Warning: It isn't the prettiest schematic you'll ever see (I'm more suited to graph paper and a good old pencil), but it gets the job done.
I'll probably use Cinemag in and out transformers, though I might look into some other ones (maybe a 1:2 10k Jensen for the output?) after the basic build is done.
Anyways, any thoughts/concerns are always welcome! I'm fairly new to electrical work, apart from basic console repair.
Schematics I used:
15C1: https://groupdiy.com/index.php?action=dlattach;topic=58393.0;attach=32789;image
22113: https://imgur.com/lzT8SKf