I discovered these things called ferrules about six months ago. I don't know where they have been all my life because I find them very useful. I don't recall seeing anyone using them for projects around here.
These are ferrules and it is the correct way to terminate a wire if you are using a Phoenix type screw connector. I have never been happy using Phoenix style connectors when using bare stranded wire or tinning the ends. If you leave it bare, the strands want to come out from under the screw. If you tin the wire it becomes brittle and is likely to break. Ferrules solve the problem.
Here is the crimp tool I use with some assorted sizes
Then I had another idea. I am not a fan of the Molex KK connectors. They just seem flimsy to me. 0.1" headers like the KK connectors are very common with projects around here and in DIY in general. I also much prefer a solder connection. I tried using a longer ferrule than needed and crimping the wire into the ferrule and then soldering to the KK header. I love it. You can do multiple solder cycles with no problem. Good for prototyping. It allows connections of one wire at a time on the header which can also be useful for troubleshooting.
Using the crimp pliers doesn't work for this because it crimps too much of the barrel. So I use an 1/8" pin punch.
I think I'm a genius for coming up with this. Maybe you will agree.
These are ferrules and it is the correct way to terminate a wire if you are using a Phoenix type screw connector. I have never been happy using Phoenix style connectors when using bare stranded wire or tinning the ends. If you leave it bare, the strands want to come out from under the screw. If you tin the wire it becomes brittle and is likely to break. Ferrules solve the problem.
Here is the crimp tool I use with some assorted sizes
Then I had another idea. I am not a fan of the Molex KK connectors. They just seem flimsy to me. 0.1" headers like the KK connectors are very common with projects around here and in DIY in general. I also much prefer a solder connection. I tried using a longer ferrule than needed and crimping the wire into the ferrule and then soldering to the KK header. I love it. You can do multiple solder cycles with no problem. Good for prototyping. It allows connections of one wire at a time on the header which can also be useful for troubleshooting.
Using the crimp pliers doesn't work for this because it crimps too much of the barrel. So I use an 1/8" pin punch.
I think I'm a genius for coming up with this. Maybe you will agree.