George Dennis pedal repair(solved)

[Seeker]

I have this pedal that should be an easy repair, but I cannot for the life of me figure out how to get access to the pcb.  It is held in on both sides by the jacks... At first, I thought I could rotate it, but it doesn't move far enough to get to anything, as the back side of the pcb hits the case.  I feel like I'm missing something obvious, does anyone have any thoughts?

 

[CJ]

take off the knobs and unscrew the pots,

 

[peterc]

.... then you should be able to rotate the PCB. The pots will come up and the jacks will stay in the same position. Fix as needed.....

 

[Seeker]

That's what I thought too... The first pic isn't very clear, but I can't seem to rotate it any further than this...  The back end of the pcb bottoms out on the case.  Is it possible that these jacks come apart? 
Or... Maybe it needs a little more elbow grease

 

[Seeker]

Well, I certailnly feel silly, it rotates out as expected...  Though it took a surprising amount of force, and I (ahem) recently learned a lesson about forcing things.