Gyraf Pultec finished (Shopping list included!)

[ChuckD]

Ok so here it is I posted the pictures already, yes there is no ground hooked up but that was fixed after the pictures were taken.

More importantly here's my Part List :
http://www.pillarsofnein.com/Images/Pultec_parts.xls

http://www.pillarsofnein.com/Images/DSCN0724.jpg
http://www.pillarsofnein.com/Images/DSCN0725.jpg
http://www.pillarsofnein.com/Images/DSCN0727.jpg

Hope you have fun building your pultecs They sound great !!!
So much better then the plugins!!

Cheers

-Chuck

 

[Zee1usa]

Hello Chuck,

That is Great!! Nice Pics!

Thanks for parts list. I hope to build a couple soon.

:thumb:

 

[Gustav]

this looks awsome. Great job.

Gustav

 

[matthias]

looks great !!

is your pultec totally free of hum now ??

I have still some problems with my pultec...
hum at 80-100hz at -55 db ...

 

[sismofyt]

Looks great! I would not use that switch for the mains though...

 

[rascalseven]

Nice presentation... very clean and professional.

The case.... let me guess.... Par-Metal?? (I like them too!)

:green:

Joel

 

[ChuckD]

No I didn't have any hum?
I can't figure out why you would....

I would guess that it is either:
1. Your power supplies are not so good.
2. You haven't grounded the signal ground togeher with AC ground.
3. THe Power where you live is really bad. Try pluging in somewhere else.


The 45 degree angle well no reason really. I wanted to leave a gap for a fan in case it ran too hot.

Thanks,

-Chuck

 

[Zee1usa]

Chuck,

How did you do the lettering on the front panel?

Is it engraved/silkscreened?

Thanks.

 

[ChuckD]

Engraved
By
FrontPanelExpress


All that info is in the parts list, including where to download the file for FPE.

-Chuck

 

[fallout]

How much did it cost to get the par-metal front panel engraved by FrontPanel Express? Thanks!

-Jay

 

[Flatpicker]

[quote author="fallout"]How much did it cost to get the par-metal front panel engraved by FrontPanel Express?[/quote]I was wondering the same thing.

 

[ChuckD]

I think it was about 61.00 USD.
All of that is in the Parts List guys....

Total price of the EQ = $377.00

Cheers,

Chuck

 

[mcs]

[quote author="ChuckD"]All of that is in the Parts List guys....[/quote]
Then post the parts list in a readable format... How about PDF, plain text or html?

Best regards,

Mikkel C. Simonsen

 

[rafafredd]

you can download excell viewer for free at the microsoft site. If you are using WinXP, just try opening the file and then ask microsoft to look for the best program to open it and it will lead you to excell viewer download directly!

 

[JayDee]

If you still need a pdf... I converted it here:

www.mutekki.com/diy/pultec_parts.pdf

 

[ChuckD]

Geeesh!

Alrighty, how about html?

http://www.pillarsofnein.com/Images/Pultec_parts.htm


-ChuckD

 

[ChuckD]

Thanks
JayDee



-Chuck

 

[b3groover]

Chuck, what about a Quark Express file please. C'mon, man.




:wink:

 

[Consul]

Can you provide that parts list as a Gerber file? :green:

 

[Gustav]

Theres a program called openoffice that will open word and excell documents. Just do a search on google.

Gustav