Not another one!
OK, here we go....
The victim:
The perpitrator:
Incision #1:
http://vacuumbrain.com/The_Lab/Thordarson/t4.jpg
Pry it open like an abalone:
Torch the header:
Lift off half the can:
http://vacuumbrain.com/The_Lab/Thordarson/t7.jpg
Case half off:
http://vacuumbrain.com/The_Lab/Thordarson/t8.jpg
Wax blob:
http://vacuumbrain.com/The_Lab/Thordarson/t9.jpg
Fire! :shock:
The Blob-2:
ird core stacking:
http://vacuumbrain.com/The_Lab/Thordarson/t14.jpg
http://vacuumbrain.com/The_Lab/Thordarson/t15.jpg
Lams. The ever popular 625EI in M6.
Couple of keeper lams on the left:
http://vacuumbrain.com/The_Lab/Thordarson/t16.jpg
Header:
http://vacuumbrain.com/The_Lab/Thordarson/t17.jpg
0.011 ga wire pri and sec
Struture: Sec-E Shield-Pri
Sec: 8 layers-426 turns
Pri: 5 Layers-214 turns,
2 partial windings of 27 and 32 turns each, outter 2 layers of Sec.
Pri: 150 ft long
Sec: 65 ft long
Kraft paper former.
64 Lams
Outter layer:
http://vacuumbrain.com/The_Lab/Thordarson/t18.jpg
E-Shield:
http://vacuumbrain.com/The_Lab/Thordarson/t19.jpg
One of the pri partials:
http://vacuumbrain.com/The_Lab/Thordarson/t20.jpg
First layer:
http://vacuumbrain.com/The_Lab/Thordarson/t21.jpg
Inductance: Pri-401 mH Sec 95 mH
DCR: Pri-12.7 ohms Sec-5.5 ohms
Self resonance peak at about 400 mHz.
Sucks down and distorts sig gen below 20 hz, otherwise flat.
Shit! I just turned 50!
Time to go home and crack a few.
see ya!
ol man cj
:?
OK, here we go....
The victim:
The perpitrator:
Incision #1:
http://vacuumbrain.com/The_Lab/Thordarson/t4.jpg
Pry it open like an abalone:
Torch the header:
Lift off half the can:
http://vacuumbrain.com/The_Lab/Thordarson/t7.jpg
Case half off:
http://vacuumbrain.com/The_Lab/Thordarson/t8.jpg
Wax blob:
http://vacuumbrain.com/The_Lab/Thordarson/t9.jpg
Fire! :shock:
The Blob-2:
ird core stacking:
http://vacuumbrain.com/The_Lab/Thordarson/t14.jpg
http://vacuumbrain.com/The_Lab/Thordarson/t15.jpg
Lams. The ever popular 625EI in M6.
Couple of keeper lams on the left:
http://vacuumbrain.com/The_Lab/Thordarson/t16.jpg
Header:
http://vacuumbrain.com/The_Lab/Thordarson/t17.jpg
0.011 ga wire pri and sec
Struture: Sec-E Shield-Pri
Sec: 8 layers-426 turns
Pri: 5 Layers-214 turns,
2 partial windings of 27 and 32 turns each, outter 2 layers of Sec.
Pri: 150 ft long
Sec: 65 ft long
Kraft paper former.
64 Lams
Outter layer:
http://vacuumbrain.com/The_Lab/Thordarson/t18.jpg
E-Shield:
http://vacuumbrain.com/The_Lab/Thordarson/t19.jpg
One of the pri partials:
http://vacuumbrain.com/The_Lab/Thordarson/t20.jpg
First layer:
http://vacuumbrain.com/The_Lab/Thordarson/t21.jpg
Inductance: Pri-401 mH Sec 95 mH
DCR: Pri-12.7 ohms Sec-5.5 ohms
Self resonance peak at about 400 mHz.
Sucks down and distorts sig gen below 20 hz, otherwise flat.
Shit! I just turned 50!
Time to go home and crack a few.
see ya!
ol man cj
:?