matta
Well-known member
Hey Guys,
I built a GSSL a few months ago and it is still operational after a good few hours in the studio but I didn't heatsink the regs and from memory the regs used to get fairly hot to the touch, but it is hard to put a reg on the board without taking them offboard, so I left it as is.
Recently I uncovered thread about using sinks on them and was wondering if other are using sinks or not.
Cheers
Matt
I built a GSSL a few months ago and it is still operational after a good few hours in the studio but I didn't heatsink the regs and from memory the regs used to get fairly hot to the touch, but it is hard to put a reg on the board without taking them offboard, so I left it as is.
Recently I uncovered thread about using sinks on them and was wondering if other are using sinks or not.
Cheers
Matt