Hot air rework: help finding an inexpensive SOP hot air rework nozzle?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thanks everyone for the awesome advice. SMT stuff is kind of tough detailed work, but it's amazing how much can be packed in.

The 858D (I'm seeing it for around $30 including shipping (!)) looks to be the good starter unit. I have a similar lower budget desoldering station that works well enough for everything I've done. At some point I can upgrade.

Yep, I'm looking to not touch the boards any more than required. I have a Classe CT-SSP to recap as well. I'm going to practice on something before I dig into either of them.

That Chip Quik stuff looks very interesting.

https://www.smelectronics.com/produ...ir-rework-station-100-480-deg-c-212-896-deg-f
 
Back
Top