khstudio
Well-known member
I feel I made a BIG mistake :sad:
I bought 3 JLM ACDC PCB's & thought I could easily find the parts & maybe even save a few bucks... I was wrong. For one, the parts aren't as cheap as I thought so I saved nothing & waisted way too much time especially with the large caps.
13mm is all the room available for the Large electro's = 1000uf @ 50v. I searched the Digikey & Mouser catalog & for one, couldn't find too many "Low ESR" & all the 50v caps were 16mm... way too big
When they say "low impedence, is it the same as low ESR???
1000uf seems a bit small for PS filtering so I really don't want to go lower. I could go with 35v but wouldn't that be too low???
... Phantom is 48v & my rails are +/- 24v.
I found all the parts but these caps... if anyone can help me, that would be cool. I'm using the supplies for mic pre's if that makes a difference choosing parts.
Next time I won't be such an ass & I'll buy the FULL kit. I'm holding up 2 orders because of these caps...grrrrrrrrrrrrrrrrrrrrr... me stupid.
Thanks,
Kevin
I bought 3 JLM ACDC PCB's & thought I could easily find the parts & maybe even save a few bucks... I was wrong. For one, the parts aren't as cheap as I thought so I saved nothing & waisted way too much time especially with the large caps.
13mm is all the room available for the Large electro's = 1000uf @ 50v. I searched the Digikey & Mouser catalog & for one, couldn't find too many "Low ESR" & all the 50v caps were 16mm... way too big
When they say "low impedence, is it the same as low ESR???
1000uf seems a bit small for PS filtering so I really don't want to go lower. I could go with 35v but wouldn't that be too low???
... Phantom is 48v & my rails are +/- 24v.
I found all the parts but these caps... if anyone can help me, that would be cool. I'm using the supplies for mic pre's if that makes a difference choosing parts.
Next time I won't be such an ass & I'll buy the FULL kit. I'm holding up 2 orders because of these caps...grrrrrrrrrrrrrrrrrrrrr... me stupid.
Thanks,
Kevin