Sold LAZ EQN, 51x fully built, calibrated, tested, and working $400 OBO

[kato]

All functions and settings work as intended. Low-frequency mod implemented.
Built for 51x rack using 24v rail. Other than testing, it has never been used on a recording project.

Inductor and cap kit from AudioMaintenance.
I'll take pics of the board / build if anyone's interested in buying, Kato

 

[duantro]

Hi Kato, would you care to elaborate on the low frequency mod?

 

[kato]

Hi Kato, would you care to elaborate on the low frequency mod?

I suppose it's more accurately known as "The James Fix."

It connects a missing trace on the board to match the Neve 1084 schematic. Everyone should implement it. But without it, you get a minor dip at 500Hz with the LF knob switched to off. It's minor enough that folks could built it stock and never notice the issue.

I'm just confirming that I corrected that in my build.