I've searched here, but part of the problem may be that I simply don't know the right terms for these things. I hoping to know typical size specifications, names, and recommendations of manufacturers or good ole Mouser part numbers for the parts coming off of a typical LDC capsule, ideally US seller.
namely:
the solder ring / wire crimp tab or whatever the metal piece that does strain relief, solder and connection around center termination of capsule. this seems most elusive part, have checked mouser, mcmaster-carr, DK...
wires - typical awg? recommendations for good rejection of the noise in the high impedance area, but also flexible and light enough to not be microphonic or otherwise problematic?
screws/nuts appear to be 1.6mm, right?
since a pic is worth a thousand words:
namely:
the solder ring / wire crimp tab or whatever the metal piece that does strain relief, solder and connection around center termination of capsule. this seems most elusive part, have checked mouser, mcmaster-carr, DK...
wires - typical awg? recommendations for good rejection of the noise in the high impedance area, but also flexible and light enough to not be microphonic or otherwise problematic?
screws/nuts appear to be 1.6mm, right?
since a pic is worth a thousand words:
Attachments
Last edited: