dbbubba
Member
I have a couple of Lexicon 224s and one unit works except it will not change/load programs.
You are supposed to hit the "CALL" button and then select the new program, but mine won't change load.
I get no errors codes at boot up and there are no error LEDs illuminating on the cards.
It comes up in program #1 and sounds fine.
All parameters can be changed.
The problem is not with the remote because I have two remotes and the problem shows up with both remotes.
I have rebuilt the 5V / +/-15V supply (new electrolytics.)
WHERE IS THE MEMORY BATTERY LOCATED?
I have looked at looked and cannot find it!
You are supposed to hit the "CALL" button and then select the new program, but mine won't change load.
I get no errors codes at boot up and there are no error LEDs illuminating on the cards.
It comes up in program #1 and sounds fine.
All parameters can be changed.
The problem is not with the remote because I have two remotes and the problem shows up with both remotes.
I have rebuilt the 5V / +/-15V supply (new electrolytics.)
WHERE IS THE MEMORY BATTERY LOCATED?
I have looked at looked and cannot find it!