Looking for an experienced US builder for a custom reamp box pedal

[Lumberjack]

I'm looking for an experienced US builder for a reamp box project based on this schematic:

https://www.jensen-transformers.com/wp-content/uploads/2014/08/as092.pdf

Write me a pm if you're interested in this job and let me know how much you'll charge me. You have to ship it to Europe once it's done.

 

[Mworthin]

It is going to be hard to beat the price of one of these. https://www.sweetwater.com/store/detail/ProRMP--radial-prormp-1-channel-passive-re-amping-device The old Radial ones used to have the Jensen transformer in them--now, the transformer itself is about the same price as the whole box.

https://www.parts-express.com/Jense...MIqomd1OLlhgMVLWBHAR2TLATlEAQYASABEgIA2PD_BwE.

You pay for the quality of that transformer.

 

[ccaudle]

The old Radial ones used to have the Jensen transformer in them

Radial owns Jensen Transformers, so I would expect that the new ones still have a Jensen transformer.

 

[Mworthin]

They also own Eclipse transformers, which they use in some products where the Jensen transformers were formerly used because Jensen couldn't keep up with the demand. The "Pro" series used the Eclipse transformers and Jensens in the models that start with J (like the JDI DI box). An email or phone call to Radial would sort that out. I would expect Jensens to be in the JCR Reamper, which is based on the Jon Cuniberti Reamper and is also a DI.