Midas TR console EDAC pinout

[mixbus]

Hello,

I am helping someone who just got an old Midas TR console. 36 inputs 8 Goups and 8 Matrix.
It is fitted with patchbays wired to EDAC connecors. The EDAC's look to be the 120 pin variety.
There are 6 EDACs. Two under the bay, three under the channels, and one under the group matrix.

Would anyone happen to have, or know what the pinout is for these?
Or any info on what the EDACS might be wired to in the bays? Looking for a place to start figuring out what these patch points are.

Thank you!

=========
Tom Jancauskas
Imedia

 

[pucho812]

you could open it up and follow the wires to see where they go. You could also do some continuity testing between patch points and the edac to see what is going on. it's the long way about it but might get you going.

 

[mixbus]

Thanks for the suggestion. That is what he was going to do.
I just wanted to see if anyone had any more info to get there faster.

=========
Tom Jancauskas
Imedia

 

[pucho812]

Thanks for the suggestion. That is what he was going to do.
I just wanted to see if anyone had any more info to get there faster.

=========
Tom Jancauskas
Imedia

I understand.