mylesgm
Well-known member
What about aes I/o? Would allow for higher sample rates and connection to aurora's, hd192's etc
rkn80 said:The inputs on every module are I2S. For the first run I'll connect it to a SHARC evaluation board because their I've direct access to I2S outputs. If successful I'll then proceed with making an ADAT interface (3x lightpipe = 24 channels) that I can connect it to an RME Hammerfall.
Matthew Jacobs said:The SMD resistors I can understand, but the big chip? Did you solder that by hand as well... that's cool....
I'm planing on building more digital stuff so I'll be interested to know any tips and tricks you have on soldering those chips.
Andy Peters said:What are you going to use for the ADAT interface? The obvious choice is the Wavefront part but I don't know if they sell small quantities.
I have an ADAT transmitter design in VHDL. One day I'll actually test it.
-a
Enter your email address to join: